Saturday, 1 December 2007
Click on the pics if you would like to see a larger image.
Stu commissioned a design for a bracelet for his significant other. It was a personal design and with some tweaking this is the result.
With a design in hand, I cut some silver wire to length.
This was then bent to match the design.
The silver curves were then soldered together.
A piece of sheet silver was soldered into place and a stylized M was cut into the sheet.
The M and the large curvy S of each link represent the initials of the happy couple.
Rings were also soldered onto the ends to enable the bracelet to be linked together.
Four of these initial links were joined together and a bar and hoop were added for the catch.
Here is the result, a unique sterling silver bracelet.